test by per - SwemaFlow 4001 measures both supply and exhaust air flow on valves, diffusers and grilles in HVAC systems. The unique Swema principle, a net of hot wires, gives accurate measuring values over the whole measurement range. The wide cross section minimizes the restriction of the flow. The measured values can be stored and transferred to PC.
SwemaFlow 4001 Manual
SwemaFlow 4001 Product sheet
Air flow: 3...1500l/s, 10.8...5400m³/h, 7...3100cfm
Temperature: 0...50°C, 32...122°F
Barometer: 600...1200hPa, 18...35 inHg
Air flow: ±3,5% read value, min ±0.5l/s, min ±1.1cfm
Temperature: ±0.6°C <50l/s, ±0.4°C >50 l/s
±1.1°F <106cfm, ±0.7°F >106cfm
Barometer: ±3.5hPa, ±0.1inHg
(Uncertainty according to GUM (JCGM 100ː2008) using a coverage factor of 2, which for a normal distribution corresponds to a probability of 95%. It is important to correct the measurement values with the corrections stated in the calibration certificate to obtain the above uncertainties.
Non condensing, non moist air, <80%RH, non aggressive gases.)
Memory: 9999 measurements
Size: 1120x680x680mm (with Hood 650x650mm)
Weight: 3.7kg (with Hood 650x650mm)
Battery charging time:<4 hours, SwemaFlow 4001 is charged with the included mains adapter or with a standard USB charger. SwemaFlow can be used during charging.
Measuring principle and recommendations
Mass flow, net of hot wires. SwemaFlow 4001 measures according to EN 16211 method ST 31 and ET 21. A Flow Factor can scale the flow, something that could be useful when balancing ventilation.
Temperature and barometric pressure is measured. Select Real or Standard flow with PC-setting.
Two handles, the measured values are easily stored by means of a button on the measuring unit.
l/s, m³/h, °C and hPa or cfm, °F and inHg, depending on PC-settings.
Segment with backlight, hold
SwemaFlow 4001, 650x650 mm hood, charging adapter (230 V), USB cable, calibration certificate, manual & case.